Other Engineering Lab Trainers Manufacturer, Suppliers and Exporter in India

Engineering Lab Lock-Out

Product Code : EL-OELT-13416

Lock-out/tag-out training system for engineering labs. Lock-outs prevent the release of hazardous energy during servicing and maintenance.

Note:

Load Cell Strain Gauge Trainer

Product Code : EL-OELT-13417

Load cell trainer with 4 bridge-mounted strain gauges, built-in amplifier and a 3.5 digit seven segment display for loads of 0-2 kg.

Note:

LVDT Displacement Measurement Trainer

Product Code : EL-OELT-13418

LVDT trainer with 2.5 kHz AC excitation, a micrometer displacement system, 10 mm range (+5 mm to -5 mm) and a 3.5 digit DPM indicator.

Note:

Pressure Measurement Trainer

Product Code : EL-OELT-13419

Pressure trainer with a pressure cell, pressure generator with display dial, signal sockets and a 3.5 digit DPM. 220 V IC regulated supply.

Note:

Magnetic Pickup Distance Measurement Trainer

Product Code : EL-OELT-13420

Distance trainer using a motor and wheel with an electromagnetic pick up, op amp signal conditioning and a 4 digit counter for 0 to 999.9 cm.

Note:

Sample & Hold Trainer

Product Code : EL-OELT-13421

Trainer with on-board ADC 0809 and DAC 0800, LED digital output, toggle switch for sample or hold, 100 ms conversion time and a 0-5 V DC signal.

Note:

Photoelectric Pick Up Speed Measurement Train

Product Code : EL-OELT-13422

Speed trainer with an on-board photoelectric sensor, DC motor with shaft, RPM meter, speed potentiometer, count reset and test points. 220 V, 50 Hz.

Note:

Desauty Bridge

Product Code : EL-OELT-13423

Bridge for comparing capacitance in terms of resistance, with decade dials on both arms, a morse key and a polished teak wood case. Accuracy +/-0.5 to 1%.

Note:

Squirrel Cage Induction Motor

Product Code : EL-OELT-13424

Induction motor with a cast iron frame, die-cast aluminium rotor and brake drum pulley. 3 phase 415 V, 0.5 to 15 HP; 1 phase 220 V, 0.5 to 2 HP.

Note:

Single Phase Transformer

Product Code : EL-OELT-13425

Double wound copper single phase transformer, 230 V AC primary, 115 V AC secondary with tappings, 1 kVA, 4 mm banana terminals, metal cabinet.

Note:

Digital Turbidity Meters

Product Code : EL-OELT-13426

Digital turbidity meters with JTU and NTU ranges, 30 mm clear glass sample tube, 6.8 V tungsten lamp, photodiode detector and 3 1/2 digit LED display.

Note:

Digital TDS Meters

Product Code : EL-OELT-13427

Digital TDS meters in lab and field models with a platinum dip cell, 0-2000 ppm and 0-20 ppt ranges and a 3 1/2 digit LED display.

Note:

Study of 4 Bit Ripple Counter

Product Code : EL-OELT-13428

Study of 4 Bit Ripple Counter (Forward & Reverse) Product description: Continuously variable voltage auto transformer, protected type.

Callender Griffiths Bridge Dial Type

Product Code : EL-OELT-13429

Dial type bridge with a 50 cm side wire of 1 ohm calibrated into 100 parts and 14 coils of 1 ohm each in series. Accuracy of adjustment 0.1%.

Note:

Dielectric Constant Apparatus

Product Code : EL-OELT-13430

Apparatus to calculate the dielectric constant of solids using an 8 MHz tunable RF oscillator, gang condenser, resonance meter and parallel plates.

Note:

Dielectric Constant Apparatus

Product Code : EL-OELT-13431

Dielectric Constant Apparatus To calculate dielectric constant of solids.

Slip Ring Induction Motor

Product Code : EL-OELT-13432

Induction motor with gun metal slip rings and carbon brushes, skewed rotor and brake drum pulley. 3 phase 415 V, 50 Hz, 2 HP to 7.5 HP.

Note:

Microprocessor Trainer

Product Code : EL-OELT-13433

8085 microprocessor trainer with a 6.144 MHz CPU, 8K bytes of EPROM and RAM, 24 I/O lines, a 25/28 key hex keyboard and six seven segment displays.

Note:

Air Conditioner Test Rig

Product Code : EL-OELT-13478

Air conditioner test rig with a hermetically sealed compressor, air-cooled condenser, 1 TR evaporator coil, PT 100 sensors, gauges and a rotameter.

Note:

Anaerobic Digester

Product Code : EL-OELT-13479

The apparatus comprises a ten-liter reactor vessel affixed to a vacuum-formed plastic base, accompanied by a liquid

Anesthesia Machine

Product Code : EL-OELT-13480

Anaesthesia machine with oxygen and nitrous oxide rotameters, a halothane vaporizer, a non-return cum blow-off valve, line pressure gauges and ventilator provision.

Note:

Air Permeability Tester

Product Code : EL-OELT-13481

Air permeability tester for filter media: 1 to 10,000 l/m2/s at a 20 cm2 test area, test pressure 20 to 2,000 Pa, touch screen display.

Note:

Angle Bracket

Product Code : EL-OELT-13482

Tolerance : Ranging from 0.02mm to 0.1mm. Materials : wide range of materials including low, middle,