Cement and Concrete Testing Equipment Manufacturer, Suppliers and Exporter in India

Cement Sampler Tube

Product Code : EL-CACTE-13070

Brass cement sampler tube, about 53 cm long and 2.8 cm in diameter, with a sharp angular edge and air hole, collecting about 300 cm3 per sample.

Note:

Compaction Factor Apparatus

Product Code : EL-CACTE-13071

Compaction factor apparatus with two funnel shaped containers and a cylinder on a rigid frame, for workability of fresh concrete with aggregate up to 38 mm.

Note:

Concrete Test Hammer

Product Code : EL-CACTE-13072

Rebound type concrete test hammer, small and big sizes, with rider scale and chart for estimating compressive strength from 100 to 700 kg/sq cm.

Note:

Flexure Testing Machine

Product Code : EL-CACTE-13073

Electrically operated flexure testing machine with an electric and hand pumping unit in a cabinet and a 0-100 kN x 1 kN load gauge.

Note:

VEE BEE Consistometer

Product Code : EL-CACTE-13074

Vee Bee consistometer with a 380 x 260 mm vibrating table, container, swivel arm with acrylic disc, slump cone and tamping rod, for fresh concrete workability.

Note:

Slump Test Apparatus

Product Code : EL-CACTE-13075

Slump cone, 20 cm base, 10 cm top and 30 cm high, with foot pieces, base plate with lifting handle and a 16 x 600 mm graduated steel rod.

Note:

KELLEY Ball Penetration Apparatus

Product Code : EL-CACTE-13076

Kelly ball penetration apparatus with a 15 kg ball based cylinder, graduated handle and guide frame, read to the nearest 0.5 mm, for concrete workability.

Note:

Pocket Concrete Penetrometer

Product Code : EL-CACTE-13077

Pocket penetrometer with a spring loaded needle, 0-50 kg/sq cm direct reading scale and marker ring, for resistance and initial set of concrete.

Note:

Concrete Mixer

Product Code : EL-CACTE-13078

Light, compact motor driven mixer for concrete and mortar, mixes a full wheelbarrow load, with stand, thermal overload protection and NVR safety switch.

Note:

Tamping Rod & Bar

Product Code : EL-CACTE-13079

Steel tamping rod, 16 mm in diameter and 600 mm long, rounded at both ends, for compacting concrete in cube moulds.

Note:

Straight Edge

Product Code : EL-CACTE-13080

Steel level bar in 2 x 18 in (5.1 x 45.7 cm) and 1 x 12 in (2.5 x 30.4 cm) sizes for trimming concrete cube and cylinder specimens.

Note:

Cube Mould

Product Code : EL-CACTE-13081

Cube moulds for concrete testing in 5, 7.06, 10, 15, 20 and 30 cm sizes, in cast iron, gunmetal, steel or plastic, each supplied with a base plate.

Note:

Blaines Air Permeability Apparatus

Product Code : EL-CACTE-13082

Variable flow air permeability apparatus for cement fineness as specific surface, with a 12.5 mm I.D. cell, U-type manometer, 12 filter paper discs and dibutyl phthalate.

Note:

VICAT R Needle Apparatus

Product Code : EL-CACTE-13083

Vicat apparatus for normal consistency and setting times of cement and class A limes, with mould, glass base plate, initial and final needles and plunger.

Note:

VICATR Needle Apparatus

Product Code : EL-CACTE-13084

Vicat needle apparatus fitted with a dashpot, with a 5 x 5 inch mild steel base plate and a 70 mm and 60 mm I.D. mould, 40 mm high, for cement consistency.

Note:

GILLMORE(R) Needle Apparatus

Product Code : EL-CACTE-13085

Gillmore needle apparatus for setting time of hydraulic cement, with an adjustable lower arm, 1/12 inch initial needle, 1/24 inch final needle and glass base plate.

Note:

Flow Table for building limes and

Product Code : EL-CACTE-13086

Flow Table for building limes and concrete cement This is utilized for deciding the workability of building limes.

Flow Table

Product Code : EL-CACTE-13087

Flow table with a 250 mm machined table top and a 100 mm conical mould for consistency of pozzolana, cement mortar and hydrated lime. Electric version available.

Note:

LE Chatelier Mould

Product Code : EL-CACTE-13088

Le Chatelier mould with a small split cylinder, two pointed indicating arms, two glass plates and a lead weight, for soundness of cement by expansion.

Note:

LE Chatelier Flask

Product Code : EL-CACTE-13089

Borosilicate glass Le Chatelier flask, 243 mm high, with a 90 mm bulb of about 250 ml and a graduated neck, for the specific gravity of hydraulic cement.

Note:

Shrinkage

Product Code : EL-CACTE-13090

Mild steel shrinkage bar mould for 25 x 25 x 250 mm bars, with machined faces, base plate and four stainless steel reference pins. Different gangs listed.

Note:

Length Comparator

Product Code : EL-CACTE-13091

Length comparator with a machined base, two columns, adjustable cross plate, .002 x 12 mm dial gauge and a stainless steel reference bar with 6.5 mm balls.

Note:

Volume Change Apparatus

Product Code : EL-CACTE-13092

Volume change apparatus for cement, with a mould and base plate, four reference pins, length comparator frame, stainless steel reference bar and 0.002 x 10 mm dial gauge.

Note:

Type Test Water Bath

Product Code : EL-CACTE-13093

Water bath for cement and concrete testing with a digital indicating type temperature controller and a stainless steel internal chamber.

Note:

Vicat Softening Temperature Apparatus

Product Code : EL-CACTE-13094

Vicat softening temperature apparatus with a weighted rod, load carrying plate, indenting tip and a micrometer dial gauge of 0.01 mm least count.

Note:

Vibration Machine

Product Code : EL-CACTE-13095

Cube vibration machine for a 220 V, 50 Hz single phase AC supply, supplied with one steel cube mould. A steel mould for a 70.6 mm cube is an optional extra.

Note:

Pulveriser

Product Code : EL-CACTE-13096

Self contained pulveriser with a planetary rotating disc, listed to reduce about 450 g of quartz type material to 100 mesh in one minute, for 440 V three phase AC.

Note:

Jolting Apparatus

Product Code : EL-CACTE-13097

Jolting apparatus for cement and concrete testing, supplied complete with mould and hopper. Suitable for 220 V, 50 cycles, single phase AC supply.

Note:

Mortar Mixer

Product Code : EL-CACTE-13098

Two-speed electric mortar mixer with 5 L stainless steel bowl, planetary paddle, water disperser (+/-1 ml) and automatic sand dispenser. Runs on 220 V, 50 Hz single phase AC.

Note:

Jaw Crusher

Product Code : EL-CACTE-13099

Compact jaw crusher for laboratory and small production use, with manganese steel jaws adjustable up to 6 mm. Crushes aggregates, ores, minerals and coal.

Note:

Air Entertainment Meter

Product Code : EL-CACTE-13100

Air entrainment meter with 0.007 cubic metre bowl capacity for a maximum aggregate size of 38 mm, used to check the air content of fresh concrete.

Note:

Air Entrainment Meter

Product Code : EL-CACTE-13101

Pressure-method air entrainment meter for fresh concrete, with a 0.005 cubic metre bowl for aggregate up to 38 mm, graduated stand pipe and gauge. Supplied with accessories.

Note: